MY Omron Özellikleri

Description

MY Miniature Power Relay Family

Best-selling, general-purpose relays that can be selected based on operating environment and application

MY family has as standard feature on all models* like: transparent cover, mechanical indicator to easily check the contacts status and the LED not only to indicate the correct operation of the relay, but also to immediate identify the coil voltage type: red LED for AC coil and green LED for DC coil
Less temperature increase thanks to the 2.6 mm wide pins which offer a higher conductivity
Selection is possible to suit the application, such as models with operation indicators and models with latching levers (MY plug-in terminals).
Wiring work can be shortened by as much as 60%** compared to conventional screw terminal sockets. Combining the MY with the push-in plus terminal sockets (PYF-[]-PU) the light insertion force permits to reduce the wiring time.

* Special models are excluded

** When both push-in plus terminals and screw terminal sockets are combined with plug-in terminal types

Models

MY(S) – Miniature Power Relays

Versatile plug-in relay that sets the standard

Over 1 billion pieces of this mini power relay have been manufactured since its introduction and have successfully been used in many different applications. Bifurcated contacts are optionally available to achieve reliable low current switching during the entire electrical life. Full range of sockets covering mounting by screw, box clamp and screw-less clamp method.
The MY-S models which include LED and Test button has become the most sold product thanks to the visible indicator and the easy to use test function
MY-S family includes MY4Z models with bifurcated contacts for minute loads
MY-S is common among the Building automation industry often choose by the customer as the preferred relay for Climate control applications/HVAC and lift

MYK – Miniature Power Latching Relays

Magnetic latching relay ideal for memory- and data-transmission circuits

MYK Magnetic latching relays that retains contact operation status and with low power consumption
Double-winding latch system that holds residual magnetism. The special magnetic materials make changes due to aging negligible, thus ensuring long continuous holding time. There is little change in characteristics such as contact follow, contact pressure, etc. throughout its long life.
Excellent vibration/shock resistance
Built-in operation indicator ensures easy ON/OFF operation monitoring
MY2K is also used in panels dedicated to Wind Energy Application

MYQ/MYH – Miniature Power Sealed Relays

Sealed relays that are tough in environments where dust or corrosive gases, etc., are present

In dust-producing environments such as where molding machines and grinders are present and in application environments in which small insects (such as gnat or mosquitos) are present, these foreign substances can penetrate into the relay, through gaps between parts of the relay and the relay’s ventilation holes. Once inside the relay, dust and insects often remain inside. If they adhere to the contacts, the result can be problems such as contact failure and unstable contacts.Plastic sealed relays (MYQ) and hermetically sealed relays (MYH) are resistant to effects from the surrounding environment
Suggested also for environments where corrosive gases such as chloride gas, sulfuric gas, and silicone gas are generated
They are also resistant to environments where salt damage is occurred and where dust is generated.
Prevent relay contact failures via a highly airtight structure

MY-GS – Miniature Power Relays Mechanical indicators added as a standard feature to our best-selling MY General-purpose relays

MY-GS the last addition to MY family: produced by a complete automated factory
Reduces wiring work by 60% when combined with the PYF-PU Push-In Plus Socket (according to actual OMRON measurements).
The Printing on the coil tape indicates the operating coil specification
Mechanical operation indicators are a standard feature on all models
RoHS complaint, UL, CSA, and IEC (VDE certification).
Mechanical indicators are a standard feature on all models to easily check the contact status.
MY-GS is suitable for application which need a reliable relay, the standard model is frequently seen in packaging machine for the food and beverage industry