Ürün açıklaması
Cam fiber optikler için fiber optik sensör
General specifications
Sensor rangeup to 100 mm
(LMR 18-3,2-1,0-K4)
Detection rangeup to 600 mm
(LME 18-2,3-0,5-K3)
Light sourceLED
Light typemodulated infrared light
Ambient light limit40000 Lux
Temperature influence≤ 0.5 mm/K
Indicators/operating means
Operation indicatorLED green
Function indicatorLED yellow: switching state
LED red: stability control (flashing)
Control elementsprogramming switch: bright/dark changeover switch
selection of the operating frequency
selection of the switching frequency
pulse extension
stability control dynamic/static
Control elementsSensing range adjuster
Electrical specifications
Operating voltage10 … 30 V DC
Ripple10 %
No-load supply current≤ 35 mA
Output
Stability alarm output1 PNP, active when falling short of the stability control
Switching typelight/dark on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching current≤ 200 mA
Switching frequency≤ 1.5 kHz / 200 Hz switchable
Response time≤ 0.3 ms at 1.5 kHz ≤ 2.5 ms at 200 Hz
Timer functionpulse extension 20 ms, switchable
Conformity
Product standardEN 60947-5-2
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
ApprovalsCE
Ambient conditions
Ambient temperature-25 … 70 °C (-13 … 158 °F)
Storage temperature-40 … 80 °C (-40 … 176 °F)
Mechanical specifications
Housing width30 mm
Housing height30 mm
Housing depth102 mm
Degree of protectionIP67
ConnectionM16 terminal compartment, core cross section ≤ 2.5 mm2
Material
HousingPBT
Optical faceScratch resistant mineral glass lens
Mass100 g
