Ürün Açıklaması
Tek kafalı sistem
General specifications
Sensing range500 … 7000 mm
Dead band0 … 500 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 50 kHz
Electrical specifications
Operating voltage8 … 18 V DC , ripple 10 %SS
No-load supply current≤ 20 mA at 12 V DC
Power consumption≤ 250 mW in the measurement operating mode
Time delay before availability≤ 165 ms
Interface
Interface typePhysical LIN interface
Transfer rate19.2 kBit/s (8N1)
Cycle time150 ms
Output
Resolution4 mm
Repeat accuracy≤ 0.1 % of full-scale value
Temperature influence3 % of full-scale value over the entire temperature range
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3
The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.
Ambient conditions
Ambient temperature-25 … 70 °C (-13 … 158 °F)
Storage temperature-40 … 85 °C (-40 … 185 °F)
Mechanical specifications
Connection typefixed cable with plug
Degree of protectionIP66 / IP67 ( connector excluded )
Material
HousingPolyester (GRP)
Enclosure coverPBT
Transducerepoxy resin/hollow glass sphere mixture
Connector
TypeJST connector: PHR-3
Number of pins3
Connection assembly
Cable
Cable diameter3 x 0.25 mm2
MaterialPVC
Length150 mm
Mass380 g
Factory settings
Output
Temperature compensation
Address setting 7
