VEGABAR 81 B81.AE5EA5GESHXAIDAX Ürün Konfigürasyonu
| Measuring unit for lengths | Metre / Millimetre |
| Measuring unit for pressure | bar |
| Scope | Europe |
| Approval | ATEX/UKEX II 1/2G, 2G Ex d IIC T6 |
| Process fitting / Material | Flange NPS 3″ Class 150 FF, ASME B16.5 / 316/316L wetted Tantalum |
| Extension diameter | 0.000 mm |
| Extension length | 0.000 mm |
| Isolating liquid / Process temperature | Silicone oil / -40…+150°C (Pabs<1bar -40…+150°C) |
| Diaphragm material | Tantalum for flange up to 3″/DN80 |
| Pressure | Relative pressure (measurement against atmosphere) |
| Measuring range | 0…+2.5bar (0…+250kPa) |
| Vacuum service | with, with measuring ranges < 0.5bar abs |
| Customer-specific adjustment | No |
| – Unit | bar |
| – Initial value | 0.000 |
| – Final value | 2.500 |
| Accuracy class | 0.20% |
| Electronics | Two-wire 4 … 20 mA/HART |
| Overvoltage protection of the supply cable | without |
| Additional electronics | without |
| Cable material / Length | no choice |
| Identification card / Tariff | without |
| Housing | Aluminium single chamber |
| Special colour | None |
| Housing version / Protection | compact / IP66/IP67; NEMA 4X |
| Cable length | 0.000 m |
| Housing base of | Without |
| Cable entry / Connection | M20x1.5 / Blind plug |
| Display/Adjustment module PLICSCOM | mounted |
| Certificates | No |
| Additional cleaning procedures | without |
| Suitable for tropical regions | without |
| Test certificate | with 5 measurement points |
| Certificate / Standard | without |
| Dye penetration test | without |
| Pressure test | without |
| Helium leak test | without |
| Radiographic test | without |
| PMI test | without |
| Low temperature test at -60 °C | without |
| Durability test more than 360 h | without |
| Isolation resistance test | without |
| Roughness test | without |
| Ferrite measurement | without |
| Foodstuff/Pharmaceutical certificate | without |
| Welding documentation | No |
| Supply certificates | no choice |
| Operating instructions | EN – English |
| Number of operating instructions | 1 |
| Measurement loop identification label | without |
| Linearization | No |
| Address setting | No |
| – Address | 0.000 |
| Application-specific settings of parameters | without |
| Attached process seal | without |
| Electronic differential pressure | Suitable configuration |
| Isolating liquid used | KN2 |
| Min. process pressure in bar | -1.000 bar |
| Max. process pressure in bar | 5.000 bar |
| Customs tariff number (HS code) | 90262020 |
| Software version | NEWEST |
